CJWINTER HOW TO SERIES

CJWinter is excited to announce that we’ll be starting a new how-to video series in order to make the operation, rebuilding, setting, and/or recalibration of our attachments more accessible and easier to understand.

The first video in this ongoing series deals with taper setting adjustments on pneumatic attachments.

Features and Benefits of CJWinter’s Pneumatic Attachments

CJWINTER HOW TO SERIES

Our pneumatic thread rolling attachments offer a range of unique benefits, including:

Convenient setup and adjustments

  • Clients get out-of-box-ready attachments that are easily adjustable
  • Users can quickly adjust feed rate and eliminate downtime

Equalized rolling pressure

  • Keeps thread rolling away from collet, guaranteeing thread concentricity
  • Eliminates side pressure on spindles and other parts
  • Allows for longer length and diameter rolling

Quick adjustments of pitch diameter

  • Users can make adjustments within .0002 inch without stopping

Patented roll compensator

  • Simplifies roll timing
  • Ensures perfect roll synchronization
  • Eliminates flaking
  • Allows for roll timing adjustments in the machine without disassembling gears
  • Allows for significant cost savings
  • Eliminates the risk of unnecessary downtime
  • Keeps the gear train free of chips, which minimizes the cost and need for replacements

Single cam for entire size range

  • Quick adjustments of penetration (roll feed) rate
  • Chip purge line

Quality components

  • 100% complete interchangeability for replacement parts
  • Zero time wasted on retrofitting

Secondary threading

  • Eliminates the need for a costly new machine
  • Allows an inexpensive lathe to be used as an auxiliary thread rolling machine

How-To adjust and set taper setting on pneumatic attachments

Double Dog Point Vs. Tapered Set Screw Attachments

There are two basic types of taper setting mechanisms in our pneumatic attachments: double dog point and tapered set screw. Learn more about these two options below.

Type A — Double Dog Point is found in our 125 Series, 141/151 Series, 160/170 Series

Tools needed for this type of attachment include: surface plate, Allen wrench, adjustable indicator stand, .0001-inch resolution indicator, and riser block (2 inches x 2.5 inches x 6 inches).

To make taper setting adjustments on this pneumatic attachment, users must follow these step-by-step instructions:

  1. Remove thread rolls.
  2. Place attachment on rise block.
  3. Indicate the carbide roll pin on both sides to assess parallelism.
  4. Loosen taper adjust set screw with an Allen wrench, and move accordingly.
  5. Tighten the locking set screw to secure carbide roll pin
  6. Re-indicate, zeroing on the immobile pin side.
  7. Indicate the moving side, and document reading.
  8. Repeat steps 2 – 7 required taper is achieved.
  9. Do the same on the other arm.

Type B — Tapered Set Screw is found in our 134 Series, 162/172 Series

For this type of attachment, users require the following tools: surface plate, Allen wrench, flat-bladed screwdriver, adjustable indicator stand, .0001-inch resolution indicator, and riser block (2 inches x 2.5 inches x 6 inches).

Taper setting adjustment instructions are as follows:

  1. Remove thread rolls.
  2. Place attachment on rise block.
  3. Indicate the carbide roll pin on both sides to assess parallelism.
  4. Loosen locking set screw with an Allen wrench.
  5. Pull out carbide roll pin.
  6. Turn the taper set screw in or out one revolution.
  7. Slide the carbide roll pin back in.
  8. Tighten down the lock-in set screw.
  9. Re-indicate, zeroing on the immobile pin side.
  10. Indicate the moving side, and document reading.
  11. Repeat steps 2 – 10 until required taper is achieved.
  12. Do the same on the other arm

Learn More

Hands adjusting taper settings on a thread rolling machine

CJWinter backs all of our products and services with a deep commitment to constant improvement and innovation. We’re proud to offer the following guarantees to all of our valued customers:

  • Unmatched customer service — We offer in-depth online support, engineering support, and scheduled on-site training services.
  • Superior tools — High-strength design and construction prolong tool life and allow for superior surface finish.
  • Fast delivery — We ship 80% of our thread rolls within 24 hours of client ordering.

For more detailed pneumatic attachment instructions and visuals, check out our how-to video here.

Lib Pietrantoni

Lib Pietrantoni, Blog Author headshot

Lib has been with the Brinkman International Group, Inc. for the last 30 years. Currently the Director of Global Sales, Lib has held numerous positions in Engineering, Operations, Sales and Product Management with CJWinter and its manufacturing divisions. Lib is a member and has served on governing boards for the Society of Automotive Engineers, The American Society of Mechanical Engineers, and Precision Machine Products Association.

Facebook
Twitter
LinkedIn
Pinterest

Leave a Reply

Featured Author
Lib Pietrantoni, Blog Author headshot
Lib Pietrantoni

Lib is the National Sales Director for the CJWinter product division. He has been awarded several patents associated with improving tooling for the thread rolling industry. He is currently a member and served on the governing boards for the Society of Automotive Engineers and the Precision Machined Products Association.

Share With a Colleague
Facebook
LinkedIn
Twitter
Email