Quick Change Pre-Set Fixture

111951

The NEW Quick Change Pre-set Fixture gives set-up personnel the option of setting tool changes off the machine, while the machine is running. Prepare the tool position, tool height, and taper while running another job. This means increased efficiency and less down time!

• Micrometer head sets the location from the collet face
• Dial indicators and gages can set the taper on the tool face
• Record data to assist in future setups

Quick Change Additional Pre-Setting Fixtures

Machine Plate 111952 New Machine Pre-set Plate can be used right at the machine to quickly set tool height after tools are removed for sharpening. This saves valuable time spent going back and forth to a preset fixture. Drill Holder Setting Gage 111953 Drill Holder Setting Gage can be used with a height gage to set drill length. The ground surface represents the spindle face.